|
|
|
Testing and Adjustment Fee Schedule |
|
MASS
Tolerance Testing |
Without
Adjustment |
With
Adjustment |
0-10 lb -
NIST Class F
ASTM Class 4, 5, 6
OIML Class M1, M2 |
$7.50
each |
$10.00
each |
11-50 lb
- NIST Class F
ASTM Class 4, 5, 6
OIML Class M1, M2 |
$7.50
each |
$15.00
each |
| 51-1000
lb - NIST Class F |
$15.00
each |
$20.00
each |
|
MASS
Calibration |
Without
Adjustment |
With
Adjustment |
0-20 lb -
ASTM Class 1, 2, 3
OIML E1, E2, F1, F2 |
$20.00
each |
Not
Available |
| VOLUME
Calibration |
Without
Adjustment |
With
Adjustment |
5 Gallon
Test Measures,
per NIST HAND BOOK 105-2 |
$15.00
each |
No
Additional Charge |
Volume
Provers,
per NIST 105-3 |
$15.00
plus $1.00 per
gallon over 5 gallons |
No
Additional Charge |
Liquid
Propane Provers,
per NIST 105-4 |
$1.50 per
gallon
(Min. $50.00) |
No
Additional Charge |
NOTES: Fees listed apply only to the testing of the standards. All
written quotes are given at the "with adjustment" rate. This fee
schedule is mandated by TCA 47-26-909. In some cases a standard will
appear to be in tolerance, however, when the uncertainty is added or subtracted,
the value of the standard is out of tolerance. Quality procedures require
the value of the standard to be in tolerance after the uncertainty is added or
subtracted from the corrected as left value. This procedure insures the
value of the standard is within tolerance. Any standard which is out of
tolerance due to these circumstances will be adjusted and charged as such. |
